Power over Ethernet (PoE) Injector

Reduce costs by using existing Cat5 cable to provide both power and dataThe Power over Ethernet Injector from Intellinet Network Solutions allows you

Ubiquiti - U-POE-AF - PoE Injector

Power Injector for POE (Power over Ethernet) 48V/0.5Amp for IP Devices

Passive PoE Injector

BV-Tech Single Gigabit Port Power Over Ethernet PoE Injector - 19W - 802.3

Remote power up to 2 10/100Mbps Access points, phones or cameras Thru CAT.5,6,7 Cable up to 328.1 feet(100 meters) Powers 802.3af devices up to 24

PLUSPOE 48 Volt Power Over Ethernet PoE Injector Adapter with 2-Ports PoE Out Max 48 watts for 2 IP Cameras, VOIP Phones or Access Points and Other

Gigabit Mode B Passive PoE Splitter-Injector Kit

BV-Tech Single Gigabit Port Power Over Ethernet PoE Injector - 19W - 802.3

L-com's POE10GAF PoE midspan injector is IEEE 802.af certified and is here to meet all your Ethernet power needs. Its single port shielded design can

PoE Midspan Injector, 1 Port Power Over Ethernet, 10 Gbps, CAT 6a or 7, 802.3af Certified, 56 Volts at 16 Watts Power Supply

Converts a non-PoE port to a PoE port and Network a PoE device located up to 100 meters (328 ft.) away. Support 10/100M IEEE802.3af PoE injector (15.4

48V PoE Injector Adapter, IEEE802.3af Compliant Power Over Ethernet Supply for Most Cisco/Polycom/Aastra/Ubiquiti Security IP Camera IP Voip Phones AP

PoE Texas POE-8-48v120w | 8 Port PoE Injector for IEEE 802.3af Power Over Ethernet Devices | with 48 Volt 120 Watt Power

Gigabit 50W Power-over-Ethernet Injector (POE-M921E）

Dual connection rj45 poe + lan. High quality electrolytic capacitors, single-sided circuit board design. Output: dc 15v1a with light. All products are

15V 1A PoE Injector Power Over Ethernet Adapter for 802.3af IP Phone WLAN AP